|
AIMS Power Inverters>
AIMS 2500 Watt Modified Sine Wave Power Inverter 24 Volt
|
 |
| Price: |
$249.00
|
| Availability: |
in stock
|
| Prod. Code: |
PWRINV2.5K24 |
|
AIMS 2500 Watt Modified Sine Wave 24 Volt DC to 120 Volt AC
Model #: PWRINV2.5K24
Modified Sine Wave Advantage:
· Portable
· Lighter weight
· Lower cost
Features:
· 2500W max continuous power
· Modified sine wave
· Volt meter on front panel to monitor your battery voltage
· Amp meter on front panel to monitor your Current use (rate at which battery is drained)
· Isolated ground neutral
· Over Temperature LED indicator
· Over Load LED indicator
· Dual AC receptacles with protective rubber covers
· On/off switch
· Over Temperature protection
· Over Load protection
· Cooling fans thermally controlled for quiet operation
· Internally fuse protected
· AC output short circuit protection
· Auto reset on most fault conditions
· Aluminum case for optimal cooling
· Pre-wired for remote on/off switch
· Pre-slotted mounting plate
· Instruction manual
· Free 1 year tech support
· 1 Year Warranty Parts and Labor
Specifications:
· Continuous output power: 2500 Watts
· Surge power capability (peak power): 5000 Watts
· DC input / operating voltage: 20 to 30 Volts
· Output voltage: 120 Volts ac +/- 10%
· Output wave form: modified sine wave with phase correction
· Output frequency: 60 Hz +/- 1 Hz
· Battery low voltage alarm: 21 +/- 0.5 Volts
· Battery low voltage shutdown: 20.0 +/- 0.5 Volts
· No load current: .35 amps with switch in the on position
· Full load efficiency: 90%
· 1/3 load efficiency: 95%
· No load minimum operating temperature: -15 degrees Celsius
· Full load maximum operating temperature: 55 +/- 5 degrees Celsius (automatic shutdown)
· AC Output Socket Type: dual Type 2 -3 prong
· High input voltage protection: 30V-34V
· Low input voltage shutdown: 20V
· Internal fuse protection
· Product size (D x W x H): 15” X 10.25 X 3”
· Weight: 13.5 lbs
· UL maximum recommended per outlet 1500W
Informational
- Manufactured in ISO 9001 certified factory
- 100% factory line test and qc approval process
|