The TS 30 Go Power! Transfer Switch has special features to simplify and speed up installation. It includes a cable with built-in plug to connect the inverter output and a receptacle that powers your converter only when shore power is available.
Some inverter installations integrate the inverter directly into the AC electrical system. An automatic transfer switch is usually installed to allow both your inverter and shore power to alternatively feed the circuits and prevent AC back feed.
The TS-30 is a two pole 30 amp AC switch that automatically connects shore power (when available) to your breaker panel. If you unplug from power, it then reconnects your inverter output to power your circuits.
This transfer switching kit ensures only one input power source is connected to loads at any time. Used with inverters to select between utility or generator and inverter power, this kit includes an attached shore cord. Produces 30 amps. The TS-30 is a two pole 30 amp AC switch that automatically connects shore power (when available) to your breaker panel. If you unplug from power, it then reconnects your inverter output to power your circuits.
It includes a hard wired plug for the inverter and also includes a charger socket prewired into the transfer switch.
